Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.99.66 (GENERIC) #0: Sun Jun 14 12:49:26 EEST 2020 root@guido.araneus.fi:/tmp/build/2020.06.13.14.31.49-i386-live/obj/sys/arch/i386/compile/GENERIC total memory = 3062 MB avail memory = 2984 MB entropy: entering seed from bootloader with 0 bits of entropy pool redzone disabled for 'buf64k' entropy: no seed from bootloader timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 aes-cbc-128 aes-cbc-256 3des-cbc-192 blowfish-cbc-448 done timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 FUJITSU SIEMENS AMILO Pro V3205 (REV1) mainbus0 (root) ACPI: RSDP 0x00000000000F7500 000014 (v00 PTLTD ) ACPI: RSDT 0x00000000BF691C1A 000044 (v01 FSC PC 20070126 LTP 00000000) ACPI: FACP 0x00000000BF697CAA 000074 (v01 FUJ___ DW1_____ 20070126 LOHR 0000005A) ACPI: DSDT 0x00000000BF692626 005684 (v01 FUJ___ DW1_____ 20070126 MSFT 0100000E) ACPI: FACS 0x00000000BF698FC0 000040 ACPI: APIC 0x00000000BF697D1E 000068 (v01 FUJ___ DW1_____ 20070126 LOHR 0000005A) ACPI: HPET 0x00000000BF697D86 000038 (v01 FUJ___ DW1_____ 20070126 LOHR 0000005A) ACPI: MCFG 0x00000000BF697DBE 00003C (v01 FUJ___ DW1_____ 20070126 LOHR 0000005A) ACPI: APIC 0x00000000BF697DFA 000068 (v01 FUJ___ DW1_____ 20070126 LTP 00000000) ACPI: BOOT 0x00000000BF697E62 000028 (v01 FUJ___ DW1_____ 20070126 LTP 00000001) ACPI: SLIC 0x00000000BF697E8A 000176 (v01 FSC PC 20070126 LTP 00000000) ACPI: SSDT 0x00000000BF691C5E 000500 (v01 PmRef CpuPm 00003000 INTL 20050228) ACPI: 2 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins cpu0 at mainbus0 apid 0 cpu0: Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz, id 0x6ec cpu0: node 0, package 0, core 0, smt 0 cpu1 at mainbus0 apid 1 cpu1: Intel(R) Core(TM) Duo CPU T2250 @ 1.73GHz, id 0x6ec cpu1: node 0, package 0, core 1, smt 0 acpi0 at mainbus0: Intel ACPICA 20200430 acpi0: X/RSDT: OemId , AslId < LTP,00000000> acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C52A64C4 0001EA (v01 PmRef Cpu0Ist 00003000 INTL 20050228) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C52A6704 0001D0 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C52FC304 000089 (v01 PmRef Cpu1Ist 00003000 INTL 20050228) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000C52FC204 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228) acpi0: SCI interrupting at int 9 acpi0: fixed power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch PDRC (PNP0C02) at acpi0 not configured acpivga0 at acpi0 (GFX0): ACPI Display Adapter acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device acpiout1 at acpivga0 (DD02, 0x0240): ACPI Display Output Device acpiout2 at acpivga0 (DD03, 0x0320): ACPI Display Output Device acpiout3 at acpivga0 (DD04, 0x0410): ACPI Display Output Device acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device acpivga0: connected output devices: acpivga0: 0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0, bios detect acpivga0: 0x0240 (acpiout1): TV/HDTV Monitor, index 0, port 4, head 0, bios detect acpivga0: 0x0320 (acpiout2): Ext. Digital Monitor, index 0, port 2, head 0, bios detect acpivga0: 0x0410 (acpiout3): Int. Digital Flat Panel, index 0, port 1, head 0, bios detect MATH (PNP0C04) at acpi0 not configured LDRC (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2F, SYN1012) (aux port): irq 12 acpitz0 at acpi0 (TZ00): cpu0 cpu1 acpitz0: levels: critical 82.0 C, passive 70.0 C, passive cooling apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 1 GPEs in block 00 to 1F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pms0: Synaptics touchpad version 5.10 pms0: Palm detect, Two button click pad, Multi-finger pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03) agp0 at pchb0: i915-family chipset agp0: detected 7932k stolen memory agp0: aperture at 0xc0000000, size 0x10000000 i915drmkms0 at pci0 dev 2 function 0: Intel 82945GM/PM/GMS Integrated Graphics Device (rev. 0x03) Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured hdaudio0 at pci0 dev 27 function 0: HD Audio Controller hdaudio0: interrupting at msi0 vec 0 hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit hdafg0 at hdaudio0: vendor 14f1 product 5045 hdafg0: ADC00 2ch: Mic In [Jack] [Built-In] hdafg0: DAC01 2ch: Speaker [Built-In] hdafg0: DIG02 2ch: SPDIF Out [Jack] hdafg0: 2ch/2ch 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3 audio0 at hdafg0: playback, capture, full duplex, independent audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording hdvsmfg at hdaudio0 not configured ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02) ppb0: PCI Express capability version 1 x1 @ 2.5GT/s pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok wpi0 at pci1 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (rev. 0x02) wpi0: interrupting at msi1 vec 0 wpi0: MoW2, address 00:18:de:24:bc:99 ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02) ppb1: PCI Express capability version 1 x1 @ 2.5GT/s pci2 at ppb1 bus 3 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x02) ppb2: PCI Express capability version 1 x1 @ 2.5GT/s pci3 at ppb2 bus 5 pci3: i/o space, memory space enabled, rd/line, wr/inv ok uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci0: interrupting at ioapic0 pin 23 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02) uhci3: interrupting at ioapic0 pin 16 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02) ehci0: interrupting at ioapic0 pin 23 ehci0: EHCI version 1.0 ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb3 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2) pci4 at ppb3 bus 7 pci4: i/o space, memory space enabled fxp0 at pci4 dev 8 function 0: Intel PRO/100 VE Network Controller (rev. 0x02) fxp0: interrupting at ioapic0 pin 20 fxp0: Ethernet address 00:16:36:c5:6e:50 inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fwohci0 at pci4 dev 9 function 0: Ricoh 5C832 PCI-SD/MMC/MMC+/MS/xD/Firewire (rev. 0x00) fwohci0: interrupting at ioapic0 pin 20 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:c0:9f:00:00:d6:39:03 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset fwohci0: Clear PME# now sdhc0 at pci4 dev 9 function 1: Ricoh 5C822 PCI-CardBus Bridge/MS/SD/MMC/SC (rev. 0x19) sdhc0: interrupting at ioapic0 pin 21 sdhc0: SDHC 1.0, rev 2, SDMA, 33000 kHz, 3.3V, 512 byte blocks sdmmc0 at sdhc0 slot 0 Ricoh 5C843 PCI-CardBus Bridge/SD/MMC/MMC+/MS/xD/Firewire (miscellaneous system, revision 0x01) at pci4 dev 9 function 2 not configured Ricoh 5C592 PCI-CardBus Bridge/MS/SD/Firewire (miscellaneous system, revision 0x0a) at pci4 dev 9 function 3 not configured Ricoh xD-Picture Card Controller (miscellaneous system, revision 0x05) at pci4 dev 9 function 4 not configured ichlpcib0 at pci0 dev 31 function 0: Intel 82801GBM LPC Interface Bridge (rev. 0x02) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer tco0 at ichlpcib0: TCO (watchdog) timer configured. tco0: Min/Max interval 1/367 seconds piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel ignored (disabled) ahcisata0 at pci0 dev 31 function 2: Intel 82801GBM AHCI SATA Controller (rev. 0x02) ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 0xc710ff03 ahcisata0: interrupting at msi2 vec 0 atabus1 at ahcisata0 channel 0 atabus2 at ahcisata0 channel 2 ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x02) ichsmb0: interrupting at ioapic0 pin 19 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 attimer1: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: FFH, lat 1 us, pow 1000 mW acpicpu0: C2: I/O, lat 1 us, pow 500 mW acpicpu0: C3: I/O, lat 57 us, pow 100 mW acpicpu0: P0: FFH, lat 10 us, pow 31000 mW, 1733 MHz acpicpu0: P1: FFH, lat 10 us, pow 23000 mW, 1333 MHz acpicpu0: P2: FFH, lat 10 us, pow 18000 mW, 1067 MHz acpicpu0: P3: FFH, lat 10 us, pow 13000 mW, 800 MHz acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=85 acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=85 fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 entropy: WARNING: extracting entropy too early timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 atapibus0 at atabus0: 2 targets uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered acpiacad0: AC adapter online. cd0 at atapibus0 drive 0: cdrom removable IPsec: Initialized Security Association Processing. cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) acpibat0: SANYO LION rechargeable battery acpibat0: granularity: low->warn 0.010 Ah, warn->full 0.025 Ah ahcisata0 port 0: device present, speed: 1.5Gb/s wd0 at atabus1 drive 0 wd0: wd0: drive supports 1-sector PIO transfers, LBA48 addressing wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO umass0 at uhub4 port 2 configuration 1 interface 0 umass0: Kingston (0x0951) DataTraveler SE9 (0x1689), rev 2.00/1.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: disk removable sd0: 7548 MB, 1894 cyl, 255 head, 32 sec, 512 bytes/sect x 15458304 sectors sd0: 12312576 trailing sectors not covered by disklabel ehci0: handing over full speed device on port 6 to uhci2 sd0: 12312576 trailing sectors not covered by disklabel sd0: 12312576 trailing sectors not covered by disklabel sd0: 12312576 trailing sectors not covered by disklabel sd0: 12312576 trailing sectors not covered by disklabel boot device: sd0 root on sd0a dumps on sd0b sd0: 12312576 trailing sectors not covered by disklabel sd0: 12312576 trailing sectors not covered by disklabel root file system type: ffs kern.module.path=/stand/i386/9.99.66/modules kern info: [drm] Memory usable by graphics device = 256M kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). kern info: [drm] Driver supports precise vblank timestamp query. i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0) kern info: [drm] initialized overlay support intelfb0 at i915drmkms0 intelfb0: framebuffer at 0xddb15000, size 1280x800, depth 32, stride 5120 wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 ubt0 at uhub2 port 2 ubt0: Cambridge Silicon Radio (0x0a12) Bluetooth USB Adapter (0x0001), rev 2.00/19.58, addr 2 entropy: WARNING: consolidating less than full entropy